The Following Is The Installation Method Of LED Panel Light
Jul 05, 2021
The following is the installation method of LED panel light. Different installations have different effects.
1. Common language office is the most common installation method: first take a ceiling, put the LED panel light driver on the ceiling next to it, connect the power cord, and then put the panel light on.
Second, it is concealed. First use a pen to draw the inner edge size of the LED panel light conversion frame, then use a utility knife to cut, then install the replacement frame and place the LED panel light driver, and finally insert the lamp into the conversion frame.
Third, the method is to install it on the ceiling. First fix the LED panel light conversion frame on the concrete ceiling with screws, then connect the LED driver, and finally press firmly to insert the panel light into the conversion frame.
Fourth, the method is hoisting, and a hoisting wire is used. First fix the 4 suspension wires on the roof, then screw the 4 suspension wires into the LED panel light, pull the wire to adjust the height of the panel light, and you're done.
