How To Use The LED Ceiling Light

Introduction to the use and installation of LED ceiling lights

LED Ceiling lamp is an ideal light source to replace traditional tungsten halogen lamps and metal halide lamps. Its advantage is that it can maintain the integrity of architectural decoration. Let's talk about the use and installation of ceiling lights.

LED Ceiling lamp is a kind of noble grade lighting and modern decorative lamps, suitable for shopping malls, supermarkets, hotels, jewelry counters and high-end homes. Its biggest feature is that it can maintain the overall unity and perfection of the architectural decoration. It has the structural advantage of using the light source to hide the interior of the architectural decoration. The LED light source is not exposed and does not irritate the eye skin! Let's take a look at the introduction of ceiling lamp manufacturers

How to use the LED ceiling light

1. Before maintenance, installation and replacement of the driver, confirm that the power supply has been cut off, and the power supply can be turned on after confirming that the lead wire of the lamp and the positive and negative poles of the output terminal of the LED driver are correctly connected.

2. Only the driver of the same model as the original lamp can be used.

3. It is not recommended to install this light on the ceiling below 10mm.

4. Do not install such lamps on easily damaged and deformable ceilings.

5. Under no circumstances should the lamps be covered by thermal insulation pads or similar materials.

6. Make sure that there are at least 75mm vents around the product. The use of this lamp cannot violate any fire protection regulations.

How to install ceiling lamps,

1. Open a mounting hole of appropriate size on the ceiling;

2. Connect the L and N poles of the type electricity to the L and N poles of the LED power driver respectively;

3. Tighten the springs on both sides and slide the lamp body into the mounting hole to ensure that the lamp is installed securely;

4. The middle is to add a boom or steel cable as a chandelier

5. Turn on the power and ready to use;