Basic Knowledge Of Controlling Dirt And Scratches On The Surface Of The Light Guide Plate Of The LED Panel Light:

Basic knowledge of controlling dirt and scratches on the surface of the light guide plate of the LED panel light:

1. Avoid processing and installing light guide plates in dust-free workshops; do not install and process them in dust-free workshops.

2. Before removing the protective film of the light guide plate, the dust and debris on the surface of the light guide plate and the installation structure should be cleaned;

3. After removing the protective film from the light guide plate, avoid touching the light guide plate with wet or sweaty hands;

4. The protective film of the light guide plate should be removed early, and the protective film should be removed before the process of installing the light guide plate according to the processing flow;

5. Avoid directly wiping the surface of the light guide plate with non-cotton materials.

6. When transporting the light guide plate, avoid random rubbing and bumping on the surface of the light guide plate; prevent sand particles from leaking into the gap of the light guide plate at the place where the light guide plate is placed; clean the foreign matter on the surface of the cutting bed when the light guide plate is cut;