Round Black Ceiling
This ceiling light is 30 Watt and LED technology, with no need for extra bulbs, easy to install, it looks pretty style with a modern design, with a 2538LM that emits higher brightness than traditional incandescent bulbs. Truly energy efficient. Your monthly electricity bill will keep getting lower and lower. All in all, it lower power consumption and higher light output.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product parameter
|
Model No. |
Size |
Energy Class |
Power |
Flux |
Voltage |
PF |
CRI |
Beam Angle |
|
PCB2-170-6W |
Ф140*17 |
F |
6 |
390 |
185-265 |
≥0.7 |
80 |
120° |
|
PCB2-170-12W |
Ф170*17 |
F |
12 |
810 |
185-265 |
≥0.7 |
80 |
120° |
|
PCB2-225-18W |
Ф225*17 |
F |
18 |
1428 |
185-265 |
≥0.7 |
80 |
120° |
| PCB2-300-24W | Ф300*17 | F | 24 | 2000 | 185-265 | ≥0.7 | 80 | 120° |
|
PCB2-330-30W |
Ф330*17 |
F |
30 |
2538 |
185-265 |
≥0.9 |
80 |
120° |
About the item:
（1）Easy Installation:30W round led ceiling light is easy to install and can be done easily by one person, only 4 steps to complete the installation, first, mount the base under the ceiling and twist the ceiling lamp into the base then you have finished the installation. Rust-proof treated white finish new round flush mount thin ceiling light suits different home styles.
(2)Safety protector & Long Lifespan:The shell of led ceiling light fixtures is made of high-quality fire-resistance plastic, protecting your house from potential disasters caused by an electrical short circuit. Excellent performance of dustproof, easy to clean. Under normal usage of 8 hours per day, lifespan could endure more than 10 years.
(3)Ultra Slim & Simplicity Design :This low profile ceiling light is only 17MM, it adopts the design of simple lines and an ultra-thin light body, showing the simplicity and low profile of modern design art, making the room looks very spacious and modern, without appearing bulky or affecting the decoration, suitable for a variety of decorative styles.
Application:
Warm Tips:
1. Before starting the installation work, make sure that the main power line is voltage-free.
2. The standard wire must not be welded, it should use with the wiring sleeve/insulation end.
3. All energized line, including the pre-assembled luminaires, must be firmly screwed on or completely plugged in, as a good connection is a prerequisite for a long lifespan under high currents.
4. The ceiling light may get hot during working, only touch or replace it after having cooled down.
5. The manufacturer's instructions are required for proper use. Please read the installation instructions before use!
6. Heat insulation must not only rely on the luminaire or operating device itself. The distance between the operating device and the light source must be at least 20cm, as heat recovery can take place at the risk of overheating! Please install the lamp in an open place.
