Led Closet Light Battery
The closet light is portable and energy saving, Built-in rechargeable battery with a USB charging port, which can be charged by any USB port, like a plug, power bank or laptop.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Widely Applications can be used in your closet, wardrobe, kitchen cupboard, bathroom counter, cabinet, understairs, shoebox, garage, storage room, basement, or any dark corner in your house.
Product Specification
Model No. | Size | Power | Flux | Voltage | CCT | Lithium battery |
CBL 150MM | 150*39.8*10 | 0.5 | 45 | DC-5V | 3/4/6000K | 420mA |
CBL 240MM | 240*39.8*10 | 1.5 | 100 | DC-5V | 3/4/6000K | 900mA |
CBL 400MM | 400*39.8*10 | 3 | 190 | DC-5V | 3/4/6000K | 1500mA |
CBL 600MM | 600*39.8*10 | 3.5 | 230 | DC-5V | 3/4/6000K | 2200mA |
Specific Details
Easy to use: The homelife led motion for the closet built-in magnet, is very easy to install and remove without a tool and stick on the iron surface. when need to change place, you can take this magnetic sensor light off anytime. Using its magnetic strip on any non-iron article surface, like a drawer, cabinets, bedroom, garage, etc.
Longer use time: 2200mA battery. It Required 1-2 hours to charge, easy to charge in the laptop, power bank. Battery-powered closet light can be used continuously for 5 hours in the on mode and used continuously for 1-2 months in the motion sensor mode. Very long use time!
PIR sensor, free your hands: The motion sensor cabinet light has 3 working modes, Motion & Light Sensor Mode, Always-On, and Off Mode. In G mode, this wireless counter light automatically turns on when detected human motion within 10 feet in a dark environment, and automatically turns off after 20 seconds if no motion is detected. Wireless design makes the products more flexible and applicable.
230lm, more bright&natural light: The led under cabinet lighting can choose from 3/4/6000K, the light bulb is hidden on the inside, avoid the light directly irritating your eyes.
Instructions
·Using the rubber-metal plate to adsorpt the built-in magnet of the light.
Tear off the adhesive tape and paste the lamp in the position where you
want to install it.
·Choose the ON dial Switch, the light will turn on forever
·Choose the AUTO dial Switch, the light will work automatically. Sensor mode, when
people come, the light will turn on and left, the light will turn off
·Choose the OFF dial Switch, the light will turn off.
·Automatic induction: if the light sensor detects the movement of the human body
Warning
1. This Under Cabinet Light Fixtures is not water proof, please do not install it in any place with moist and rainy.
2. do not install it in the place with high humidity and strong light and air vents to avoid
fault triggering.
3. When the light is dim, please charge the product in time. When the indicator light
is on, the indicator light is red, and the indicator light is green after charging is
completed.
4. When the product fails during the warranty period, do not dismantle the product
privately, otherwise it will not be guaranteed.
