LED Batten fixture
IP65 Waterproof, dustproof Indoor and outdoor led batten fixture High-quality PC material cover, Aluminum Alloy Plate 3 option:20W (0.6M),40W(1.2M),50W（1.5M）
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This Outdoor Slim LED Batten, it's IP65 waterproof and dustproof, can be widely used in both indoor situation and outdoor situations. A high-quality PC cover, can be IK08, avoid the damage maximumly, more durable, and high brightness.
Model No. | Size (A*B*Cmm) | Power (W) | Flux (LM) | Voltage (V) | PF | CRI | Beam Angle |
IP65-BL-50-20W | 600*53*28 | 20 | 1600 | 165-265 | 0.7 | 80 | 120° |
IP65-BL-50-40W | 1200*53*28 | 40 | 3200 | 165-265 | 0.9 | 80 | 120° |
IP65-BL-50-50W | 1500*53*28 | 50 | 4000 | 165-265 | 0.9 | 80 | 120° |
Product Details
1) High Brightness LED solution: With Branded Chip like Sanan's Chip, it makes the light in high brightness, and passes the new ERP test!
2)Good performance Driver Solution: The PCB Solutions of this range are designed ourselves, with the professional R&D Dept. In the production, we make the driver in the SMT workshop and machine
3)Stricly Quality Inspection checking: all the coming raw material is strictly inspected, also both during production and pre-shipment inspection also strictly complied with.
4)Aging Test: All of our products are 100% aging tests in low and high voltage, to make sure all of them are of good quality.
Applications
This waterproof led fixture can be widely used in the below locations:
*Carparks, garages, and washroom.
*Workshop, shed, and warehouse.
*Buildings, plants.
*Schools, universities, and government buildings.
The IK08 rating makes this light fitting suitable for installation in vandalism-prone locations.
Installation
It's very easy to assemble, just a few steps, turn off the switch, fix the bracket into the wall/ceiling with screws, connect the wire of the lamp and put the light well assembled on the bracket, turn on the switch, it's done!
Notes
*Protect the LED from excessive humidity.
*When installing outdoors or in a higher humidity environment, be sure to provide the power connection with a watertight junction box. Otherwise, the product as a whole will not meet the requirements of IP protection class 65 and may not be used outdoors.
*If the plastic tray is damaged, the product is no longer usable and its use is prohibited.
*Do not cover or enclose the LED light bar with heat-insulating material.
*Read the instructions carefully before starting the installation. Keep the instructions for use.
