TRI Proof LED Light Fixture
*Type:Linkable LED Batten
*Material:PC Cover+Aluminum
*Assembling:Surface Mounting
*Size:600/900/1200/1500mm
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This TRI Proof LED lamp designed and manufactured by Topjet LED, with strict quality control, 100% aging test before packaging, and an efficient energy-saving solution makes your life more environmentally friendly and effortless.
Product Features
● Tri Proof LED Light Fixture can be a linkable version with the connected wire.
● Pure PC cover, the light transmittance above 90%.
● Built-in IC driver,over-current and over-voltage protection.
● PC cover: light is soft and even, with high light transmittance.
● Lamp body, anti-oxidation, anti-rust, good heat sink, and ensure product life.
Model No. | Size(mm) | Power (W) | Flux (LM) | Voltage (V) | PF | CRI | Beam Angle |
SBL70-0.6M | L580*W70*H35 | 12 | 1200 | 220-240V | >0.7 | >80 | 120° |
SBL70-0.9M | L880*W70*H35 | 18 | 1800 | 220-240V | >0.7 | >80 | 120° |
SBL70-1.2M | L1180*W70*H35 | 24 | 2400 | 220-240V | >0.7 | >80 | 120° |
SBL70-1.5M | L1480*W70*H35 | 30 | 3000 | 220-240V | >0.7 | >80 | 120° |
Applications
This range is suitable for commercial and industrial uses such as garages, office buildings, shopping malls, workshops, etc. This economic series of LED slats provides cost-effective reliability. We design and produce the choice of body materials and electronic components. We hope to produce the best quality for the best price.
Assembling
1. Secure the buckle to the mounting surface using wire rolling tapping screws. Note that the distance between the two buckles should be less than the length of the lamp.
2. Remove the protective plug cover from the end cover.
3. Connect the male and female ends of the two lamps and insert them tightly.
4. Plug the male plug and female plug of the two lamps tightly by using the middle plug cable.
5. Use the output end of the power plug cable to plug into the jack end of the first lamp and the other end to plug into the power socket and then into the power supply (220-240V~) to realize lighting.
